Anti-Thrust Devices

 

Anti-thrust plate is Locksmith terminology for a flat plate that is fitted to the external face of a door, overlapping the edge and covering the gap between the door and frame to prevent someone using an implement to tamper with the latch or bolt.

 

  • All Kickstop Anti-Thrust Plates are made from 3mm thick steel.
  • Because the plate overlaps the edge of the door, it would be fitted to a pair of doors or a single door that opens outward.
  • For the same reason, if it is fitted to double doors that open inward, it cannot be fitted to the door that opens first.
  • Kickstop supplies high security Anti-Thrust Plates and very high security Anti-ThrustGuards and a complete list and description is provided below.

 

 

Before ordering

*Very carefully check the type of keyway you require

Traditional UK (UK) - Euro profile cylinder (EU) - Oval cylinder (OV)

 

NB: Choose the device/plate with the correct shape of keyway 

 

 

Anti-Thrust Devices to provide anti-jemmy protection for mortice deadlocks and latches

AT1UK , 2021UK, AT1EU, 2021EU, AT1OV, 2021OV

 

 

 

UK

(for traditional lever/detainer mortice deadlock)

 

EU

(for Euro Profile cylinder mortice deadlock)

OV

(for Oval Profile cylinder mortice deadlock)

Mortice deadlocks shown above - for illustration purposes only

 

Euro Cylinder 

 Oval Cylinder

 

 

Mortice deadlock cylinders shown above  - for illustration purposes only

 

 

 

AT1UK

203 x 100 x 3mm

Reversible - NOT Handed

(Countersunk Both Sides)

 AT1EU

203 x 100 x 3mm 

Reversible - NOT Handed

(Countersunk Both Sides)

AT1OV

203 x 100 x 3mm 

Reversible - NOT Handed

(Countersunk Both Sides)

2021UK

203 x 100/50 x 3mm 

Reversible - NOT Handed

(Finished Both Sides) 

2021EU

203 x 100/50 x 3mm 

Reversible - NOT Handed

(Finished Both Sides)

2021OV

203 x 100/50 x 3mm 

Reversible - NOT Handed

(Finished Both Sides)

 

Anti-Thrust Devices to provide anti-jemmy protection for mortice sashlocks

AT5, 2025

With 'Universal' elongated hole for use with UK Keyway, Euro and Oval profile cylinder

For use with existing lever lock furnitiure

 

AT5

240 x 100 x 3mm

The top elongated hole is for the spindle

The lower 'universal' hole is for the UK keyway, Euro cylinder or Oval cylinder

Reversible - NOT Handed

(Countersunk Both Sides) 

2025

240 x 100/75 x 3mm

The top elongated hole is for the spindle

The lower 'universal' hole is for the UK keyway, Euro cylinder or Oval cylinder

Reversible - NOT Handed

(Finished Both Sides) 

 

Anti-Thrust Device to provide anti-jemmy protection for cylinder rimlocks

AT6

 

AT6

203 x 120 x 3mm 

Hole for cylinder is 47.5mm in diameter

Reversible - NOT Handed

 

Anti-Thrust devices to provide anti jemmy protection for single or double doors - with no keyway

AT1, AT2, AT4

 

AT1

203 x 100 x 3mm 

Reversible - NOT Handed

AT2

480 x 80 x 3mm - 5 screws

Reversible - NOT Handed

AT4

1980 x 80 x 3mm - 19 screws

Reversible - NOT Handed

 

BUY Anti-Thrust Plate - Screw on plate (Sentinel security screws supplied)

 

BUY Anti-ThrustGuard - Bolt through plates (security fixings supplied)

 

Tel: 01536 790999    Fax: 01536 790710

 

Online B2B shop powered by Security Matters